Adblue is an exhaust fluid used in modern diesel engines. Composed mainly of water and a 32.5% urea solution, Adblue works in conjunction with the SCR (Selective Catalytic Reduction) system to reduce harmful nitrogen oxide (NOx) emissions, minimizing environmental pollution. However, Adblue systems can sometimes cause various issues for vehicle owners. They can lead to SCR and NOx errors, negatively affecting the vehicle's performance and causing engine failures. Additionally, regularly refilling the Adblue fluid and maintaining the system incurs extra costs. Leave these challenges behind with the Kia Ceed Sim2K-510 SCR + DPF Adblue Removal Emulator.

The Kia Ceed Sim2K-510 SCR + DPF Adblue Removal Emulator completely eliminates these kinds of problems. Faults in your Adblue system, SCR, and NOx errors become a thing of the past. The Adblue removal emulator enhances your vehicle's performance and reduces maintenance costs. You save on costs as you no longer need to constantly refill the Adblue fluid, and you are freed from potential failures and errors.

Compatible Engines: Kefico Sim2k-510

The Kia Ceed Sim2K-510 SCR + DPF Adblue Removal Emulator comes with a 5-year warranty.

Additionally, after blockages in DPF systems, exhaust system errors occur. In vehicles with the Kefico  Sim2K-510 engine control unit, errors occur after the DPF sensors reach their saturation levels. The Kia Ceed DPF filter sensor determines the soot level in the exhaust. Thanks to this, the exhaust system continues to operate. The Kefico  Sim2K-510 engine control unit includes NOx sensors, exhaust temperature sensors, a PM sensor, and a DPF differential pressure sensor. Based on the information from these sensors, Kia works stably with the SCR and DPF systems. This emulator allows it to work compatibly with the Kefico Sim2K-510 engine control unit. It fully simulates the SCR and DPF systems.

Simulated Systems

• Adblue pump
• Adblue control unit
• Input-output NOx sensor
• PM sensor
• Adblue level/quality/temperature sensor

NOTE: If your DPF filter is damaged or if you wish to remove your intact filter, you can cancel the DPF filter by connecting all the cables. If your DPF filter is intact and you do not want to remove it, you can connect only the green-yellow CAN-BUS wires and the red-black voltage wires as described in the document, simulating only the SCR system. In this connection type, regeneration is not required, and your DPF filter will not get clogged.