THINKTOOL Battery Tester | How to use THINKTOOL Battery Tester ?

This article will guide you how to use THINKTOOL battery tester to operate battery healthy test, starting system test and charging system test.


THINKTOOL Battery Tester support THINKTOOL Master, THINKTOOL Master X, THINKTOOL Lite, THINKTOOL.The detail operating steps are as follow.

1. Click Setting.

2. Click Setting.

3. Click Mode Switch.

4. Click Host Mode and Return.

5. Click Module.

6.Click BATTERY TESTER

7. Click BATTERY HEALTH TEST.

8.Click More help to check some instructions.

9.More help explains How to identify battery type.

10. Click AGM Flat Plate to check it.

11. Test no floating electricity detected. Click Cancel floating electricity detection.

12.There are many kinds of testing standards. Take the Battery Council International as an example.

13.The tested battery capacity is 500. Input the value and Click Next.

14.After testing the health of the battery. Click Start system test.

15. Turn off all the electrical components. Click OK.

16.Start following the prompts.

17.Display Starting voltage normal. Click Charging health test.

18. Making sure the engine starts. Click OK.

19.Increase the speed to 2500RPM and keep for 5 seconds. Click OK.

20. After the charging system is tested. Return to Home.

21.Click GENERATE REPORT if needs.

22. Input vehicle information. Click Save report.

23. Car Battery Detection Report has done.