Kubota engine used in vehicles with Kubota engine uses adblue liquid in some models, and only DPF filter is available in others. In vehicles that have only a DPF filter and do not use Adblue liquid, the error rate is higher than in vehicles that use Adblue liquid, as the DPF filter fills up faster than the vehicles used. For this reason, Kubota, which uses only a DPF filter that does not use adblue liquid, will offer trouble-free operation thanks to the Kubota DPF emulator developed to minimize the error rate in vehicles. In these vehicles with Kubota DPF differential pressure sensor, when the DPF filter is filled, the DPF differential pressure sensor will detect it immediately and transmit the correct data to the engine brain. Engine ECU su reflects the warning of DPF cleaning of the vehicle within a certain time frame to the display information in accordance with this information. In accordance with this information, users should clean the DPF filter and connect to the vehicle ECU with the vehicle fault detection device to delete the fault. 

So is the Emulator easy to assemble?

It is very easy to install DPF emulator on Kubota vehicles. The reason why it is easy is that the appropriate document information is provided directly by the seller. There are exactly 11 cables in the Kubota DPF emulator. 2 of them are thin green wires, they must be connected to the temperature sensor of the filter used for the filter before the DOC filter, that is, the DPF filter. Then there are 2 thin yellow wires, which will also be connected to the input temperature sensor of the DPF filter. there are also 2 blue thin cables, which will also be connected to the output temperature sensor of the DPF Filter. But the most important of the operations that should not be forgotten is that these installations will be made on the side of the vehicle and the sensors will remain idle.

Then connect the cable, which is white, to the DPF differential pressure sensor 3. must be connected to the pin. The connection of the exhaust part of the Kubota DPF emulator for connection is finished and only the lifelines and power cables coming out of our emulator will be connected in the front part. The important thing is that the red cable of the emulator must definitely be the contact line.

Thanks to the Kubota DPF emulator, a quick solution is provided and you will get rid of errors and expenses on Kubota vehicles. Kubota DPF emulator eliminates torque limitation and time problems. 

Kubota DPF emulator compatible models:

Kubota DPF emulator is compatible with all models with Kubota engine and not using Adblue fluid.

Click here for Kubota DPF Emulator assembly PDFs.